Access control Cliq2 and other traditional keys
Concerning the keys new access control process does not cover the Protec2 Cliq keys or other mechanical keys. With the same old mechanical keys you still can access working or team rooms. Also the Cliq keys will still be ordered from building's lobby services. The mechanical key for the inner doors can be obtained from the key manager of each unit.
If your Cliq key is lost
The loss of the Cliq key must be reported immediately to the person who distributed the key/lobby services, or by e-mail to the address kulkukortit (at) aalto.fi. The charge for the missing Cliq key is 50 euro. This sum is to be paid Nordea bank account FI55 1660 3000 0604 60. Write to the message field Lost key and name of key owner. You can get a new key by showing the receipt at the lobby services.
Many different kinds of access rights can be programmed to the one Cliq key. Key access rights are valid for 20 hours at a time and are activated by inserting the key into wall units installed in the building walls, which are also called “key refresh points.” Refresh points are installed in every building which uses Cliq keys.
The key battery lasts for several years. When the battery starts to run low, the red battery indicator light on the refreshment point will turn on. Then have the lobby service replace your key with a new battery.
- Published:
- Updated: