Kalle Jalava

Laboratorioinsinööri

T212 Department of Energy and Mechanical Engineering

Laboratorioinsinööri

Full researcher profile

https://research.aalto.fi/...

About me

I work at Department of Mechanical Engineering at the School of Engineering. My responsibilities include management and use of metalcasting, welding and heat treatment facilities located at Konetekniikka 2 (Puumiehenkuja 3) and education related to these topics. You can contact me in issues related to these fields and among others, my specializations include ferrous and non-ferrous metallurgy; especially cast irons, moulding processes for metalcasting with traditional and additive manufacturing methods, molten metal processes and joining of metals.

[email protected]

Postal address

Puumiehenkuja 3 02150 Espoo Finland

Phone number

+358503282870

Publications

Effect of Additives on Heat Hardened Inorganic Solid Foundry Binder

Nurul Anwar, Katarzyna Major-Gabryś, Kalle Jalava, Juhani Orkas 2024 International Journal of Metalcasting

Evaluation of 3D-printed Pattern Material for Heat-hardened Inorganic Moulds

Kalle Jalava, Nurul Anwar, Juhani Orkas 2024 Journal of Casting & Materials Engineering

Experimental Study of Inorganic Foundry Sand Binders for Mold and Cast Quality

Nurul Anwar, Kalle Jalava, Juhani Orkas 2023 International Journal of Metalcasting

Evaluation of 3D printed pattern material for heat-hardened inorganic molds

Kalle Jalava, Nurul Anwar 2023

Potential and Challenges of Fused Granular Fabrication in Patternmaking

Kalle Jalava, Joni Korpi, Alexander Strakh, Juhani Orkas 2023 International Journal of Metalcasting

Additively Manufactured 2D Matrix Code Direct Part-Marking Casting Requirements

Tekin Uyan, Kalle Jalava, Juhani Orkas, Kevin Otto 2023 International Journal of Metalcasting

Sand Casting Implementation of Two-Dimensional Digital Code Direct-Part-Marking Using Additively Manufactured Tags

Tekin Uyan, Kalle Jalava, Juhani Orkas, Kevin Otto 2022 International Journal of Metalcasting

Comparative experimental study of sand and binder for flowability and casting mold quality

Nurul Anwar, Tommi Sappinen, Kalle Jalava, Juhani Orkas 2021 Advanced Powder Technology

Cast iron selection based on design requirements of thermomechanically loaded applications and its' foundry challenges

Kalle Jalava, Ari Mourujärvi, Jarkko Laine, Juhani Orkas 2021 Conference proceedings of the 12th International Symposium on the Science and Processing of Cast Iron

The Mechanical Properties of Ductile Iron at Intermediate Temperatures

Jarkko Laine, K. Jalava, Joona Vaara, K. Soivio, T. Frondelius, J. Orkas 2021 International Journal of Metalcasting

Investigation on dynamic strain aging behaviour of ferritic-pearlitic ductile cast irons

Kalle Jalava, Jarkko Laine, Joona Vaara, Tero Frondelius, Juhani Orkas 2020 Materials Science and Technology

On thermal and mechanical behavior of cast irons at elevated temperatures

Kalle Jalava 2020

Ductile iron optimization approach for mechanically and thermally loaded components

Jarkko Laine, A. Leppänen, K. Jalava, Joona Vaara, T. Frondelius, J. Orkas 2020 International Journal of Metalcasting

Additively Manufactured Tags for Cast Part Traceability Using Two-Dimensional Digital Code Direct-Part-Marking

Tekin Uyan, Kalle Jalava, Juhani Orkas, Kevin Otto 2020 ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference

Multi-scale topologically optimised components made by casting and additive manufacturing

Kalle Jalava, Mika Salmi, Kirsi Kukko, Juhani Orkas 2019

Effect of Silicon and Microstructure on Spheroidal Graphite Cast Iron Thermal Conductivity at Elevated Temperatures

Kalle Jalava, Kaisu Soivio, Jarkko Laine, Juhani Orkas 2018 International Journal of Metalcasting

Elevated temperature thermal conductivities of some as-cast and austempered cast irons

Kalle Jalava, Kaisu Soivio, Jarkko Laine, Juhani Orkas 2018 Materials Science and Technology

MULTI-SCALE TOPOLOGICALLY OPTIMIZED COMPONENTS MADE BY CASTING AND ADDITIVE MANUFACTURING

Kalle Jalava, Mika Salmi, Kirsi Kukko, Juhani Orkas 2018 73rd World Foundry Congress, Congress Proceedings

Digitaaliset varaosat

Mika Salmi, Jouni Partanen, Jukka Tuomi, Sergei Chekurov, Roy Björkstrand, Eero Huotilainen, Kirsi Kukko, Niklas Kretzschmar, Jan Akmal, Kalle Jalava, Satu Koivisto, Matti Vartiainen, Sini Metsä-Kortelainen, Pasi Puukko, Ari Jussila, Tuomas Riipinen, Joni Reijonen, Hannu Tanner, Markku Mikkola 2018

Digital Spare Parts

Mechanical Properties of Cast Aluminium Matrix Composites Reinforced with SiC and Al2O3 Particles

Kim-Niklas Antin, Kalle Jalava 2015 20th International Conference on Composite Materials